Explosion Housing
H6000-Type

Surface Mounting
NEMA 3R - NEMA IV - NEMA VII
Cast Iron - Hot Dipped Galvanized

Standard Construction: Available Extras:

(1) Box and cover of cast iron.
(2) Two mounting lugs each long side on standard centers. Specify bolt size.

 (1) Drilling and tapping.
(2) Bosses for five threads to sketch.
(3) Interior mounting buttons tapped blind.
(4) Bronze hinges for heavy covers.
Having a precision machined surface on flange
of box and matching surface on cover, all
H6000 Type boxes are NEMA 3R (Raintight)
and NEMA IV (Weatherproof) without need for
a gasket.

H6000 type explosion housings have been specified and installed in Class I, groups C and D hazardous locations by the larger engineering and erecting companies. Manufactured to the standards of the Underwriters’ Laboratories, Inc., but not tested by them.
Competent specifying engineers have readily recognized the substantial construction of box and cover with the precision finished metal to metal joint as wholly adequate for the use of these boxes for pull and junction service and as enclosures for devices in gasoline refineries, chemical process and powder plants, gas pumping stations and other hazardous locations.
Conduit entrances must have five threads. Check wall of box with table in the Ordering Information section.
NOTE: All boxes are made out of cast iron unless specified.
To specify cast aluminum construction, please add the AL to the end of any part number.
Cat No. Inside
Dimensions
Inches LxWxD		 Approx.
Weight
Lbs.		 Approx.
Wall Thick
Inches		 Cat No. Inside
Dimensions
Inches LxWxD		 Approx.
Weight
Lbs.		 Approx.
Wall Thick
Inches
H60-040404 4x4x4 18 7/16 H60-181806 18x18x6 192 7/16
H60-050503 5x5x3 20 7/16 H60-181808 18x18x8 210 7/16
H60-050504 5x5x4 22 7/16 H60-181812 18x18x12 252 1/2
H60-060403 6x4x3 19 7/16 H60-181818 18x18x18 420 1/2
H60-060404 6x4x4 22 7/16 H60-191404 19x14x4 158 7/16
H60-060604 6x6x4 28 7/16 H60-191406 19x14x6 170 7/16
H60-060605 6x6x5 32 7/16 H60-191410 19x14x10 210 7/16
H60-060606 6x6x6 38 7/16 H60-191412 19x14x12 230 7/16
H60-080404 8x4x4 26 7/16 H60-201008 20x10x8 160 7/16
H60-080604 8x6x4 30 7/16 H60-201204 20x12x4 135 7/16
H60-080606 8x6x6 36 7/16 H60-201206 20x12x6 145 7/16
H60-080804 8x8x4 48 7/16 H60-240808 24x8x8 160 7/16
H60-080806 8x8x6 60 7/16 H60-241206 24x12x6 180 7/16
H60-0808065 8x8x6-1/2 54 7/16 H60-241208 24x12x8 200 7/16
H60-080808 8x8x8 60 7/16 H60-241210 24x12x10 230 7/16
H60-100604 10x6x4 38 7/16 H60-241212 24x12x12 255 9/16
H60-100606 10x6x6 49 7/16 H60-241606 24x16x6 210 7/16
H60-100804 10x8x4 50 7/16 H60-241608 24x16x8 240 7/16
H60-100806 10x8x6 66 7/16 H60-241804 24x18x4 210 7/16
H60-100808 l0x8x8 76 7/16 H60-241806 24x18x6 230 7/16
H60-101004 l0xl0x4 60 7/16 H60-241808 24x18x8 255 7/16
H60-101006 10x10x6 70 7/16 H60-241810 24x18x10 280 7/16
H60-120604 12x6x4 48 7/16 H60-241812 24x18x12 380 5/8
H60-120606 12x6x6 70 1/4 H60-241818 24x18x18 475 1/2
H60-120804 12x8x4 70 7/16 H60-242406 24x24x6 330 7/16
H60-120806 12x8x6 76 7/16 H60-242408 24x24x8 365 7/16
H60-120808 12x8x8 80 7/16 H60-242410 24X24x10 410 7/16
H60-121006 12x10x6 92 7/16 H60-242412 24x24x12 430 1/2
H60-121204 12x12x4 85 7/16 H60-242416 24x24x16 460 5/8
H60-121206 12x12x6 96 7/16 H60-241407 24x14x7 270 7/16
H60-121208 12x12x8 119 7/16 H60-241417 24x14x17 410 7/16
H60-121210 12x12x10 136 7/16 H60-292706 29x27x6 540 5/8
H60-121212 12x12x12 150 7/16 H60-300910 30x9-3/8x10 230 7/16
H60-140806 14x8x6 82 7/16 H60-301206 30x12x6 206 7/16
H60-140808 14x8x8 100 7/16 H60-301208 30x12x8 245 7/16
H60-141006 14x10x6 115 7/16 H60-301808 30x18x8 376 7/16
H60-141008 14x10x8 130 7/16 H60-301812 30x18x12 420 1/2
H60-141404 14x14x4 101 7/16 H60-302408 30x24x8 410 1/2
H60-141406 14x14x6 145 7/16 H60-302412 30x24x12 475 1/2
H60-141408 14x14x8 151 7/16 H60-360910 36x9-3/8x10 275 1/2
H60-141410 14x14x10 159 7/16 H60-362408 36x24x8 730 1/2
H60-150907 15x9x7 104 7/16 H60-362412 36x24x12 810 5/8
H60-161006 16x10x6 102 7/16 H60-362418 36x24x18 1020 5/8
H60-161206 16x12x6 120 7/16 H60-362410 36x30x10 820 5/8
H60-161208 16x12x8 180 5/8 H60-363608 36x36x8 980 5/8
H60-161410 16x14x10 176 7/16 H60-363612 36x36x12 1200 5/8
H60-180606 18x6x6 92 7/16 H60-391407 39x14x7 460 7/16
H60-181204 18x12x4 129 7/16 H60-420910 42x9-3/8x10 300 7/16
H60-181206 18x12x6 148 7/16 H60-480808 48x8x8 330 7/16
H60-181208 18x12x8 164 7/16 H60-482408 48x24x8 840 5/8
H60-181210 18x12x10 180 7/16 H60-482412 48x24x12 980 5/8
H60-181212 18x12x12 200 7/16 H60-484818 48x48x18 1586  5/8
H60-181218 18x12x18 242 7/16 H60-703012 70x30x12   5/8
H60-181408 18x14x8 185 7/16        
H60-181804 18x18x4 170 7/16        

Explosion Gutter Boxes
H5400 and H5600 Type

Mounting Lug Data
H5400 and H5600 Gutters
HD5400 and HD5600
Heavy Duty Gutters

Cat
No.		 Inside
Inches
LxWxD		 Max.
Conduit*
No Boss		 With
Boss*		 Approx.
Width
Lbs.
H54-080404 8x4x4 2" 2 1/2" 25
H54-120404 12x4x4 2" 2 1/2" 36
H54-160404 16x4x4 2" 2 1/2" 52
H54-240404 24x4x4 2" 2 1/2" 74
H54-360404 34x4x4 2" 2 1/2" 95
H56-080606 8x6x6 2" 4" 45
H56-120606 12x6x6 2" 4" 60
H56-160606 16x6x6 2" 4" 76
H56-240606 24x6x6 2" 4" 112
H56-360606 36x6x6 2" 4" 154


Explosion gutters provide adequate volume for splicing straight through, L or T, as tappings can e on ends, sides or back.
Box
L x W		 A B J E L
8 x 4 7 6 7/16 9 3/4
8 x 6 7 8 7/16 9 1/4 5/8
12 x 4 11 6 7/16 13 5/8
12 x 6 11 8 7/16 13 1/4 5/8
16 x 4 15 6 7/16 17 3/4
16 x 6 15 8 7/16 17 1/4 5/8
24 x 4 23 6 7/16 25 3/4
24 x 6 23 8 7/16 25 1/4 5/8
34 x 4 33 6 7/16 35 5/8
36 x 6 35 8 7/16 37 1/4 5/8

 

Home Available Extras | Mounting Lug Data
Cross Reference | Ordering Information | Contact Us

Hope Electrical Products Co., Inc.
7 Fairfield Crescent • West Caldwell, NJ 07006
Phone: 973-882-7400 • Fax: 973-244-9292

Copyright ©2002 Hope Electrical Products Co., Inc.