Hinged Weatherproof Terminal Cabinets
H3200-T Type

Surface Mounting
NEMA 3R - NEMA IV - Complies with U/L Std. 50
Cast Iron - Hot Dipped Galvanized

Standard Construction:	Available Extras:
(1) Box and cover of cast iron. (2) Stainless steel hardware. (3) Neoprene gasket. (4) Four exterior mounting lugs. (5) Terminal blocks mounted on interior buttons or pads. Maximum wire size #10 AWG.	(1) Drilling only. Drilling and tapping. (2) Bosses for five threads. (3) Special gaskets. (4) Hasp without lock.

H3200-T type terminal cabinets are approved H3200 type enclosures in which substantially constructed terminal blocks are mounted. A variety of sizes for differing wire conditions are listed. The terminal blocks, rated at 30 amperes and 750 volts, are mounted on blind tapped buttons or pads that insure weather tightness and provide an air gap under the block. Each terminal block carries a white-faced target strip for marking connections. Ample wiring space is provided between wall of box and block, and, block to block. Conduit entrances should be ordered with bosses for five threads to insure raintight and dust-tight installation. Every cabinet can be equipped with a galvanized non-removable hasp to prevent tampering.

NOTE: All boxes are made out of cast iron unless specified.
To specify cast aluminum construction, please add the AL to the end of any part number.

Number of Wires	Catalog Number	Argmnt. of Blocks Vertical Rows	Wiring Space Inches Block to Wall	Block to Block	Inside Dimensions Inches L.xW.xD.	Wall Thick. Inches*	Max. Conduit Inches	No. of Hinges	No. of Wing Nuts	Approx. Weight lbs.
2	H32T2-050503	l	1.5		5x5x3	1/4	1	2	1	15
4	H32T4-050503	l	1.5		5x5x3	1/4	1	2	1	16
6	H32T6-080604	l	2		8x6x4	1/4	2	2	2	24
8	H32T8-100604	l	2		10x6x4	1/4	2	2	2	30
12	H32T12-120604	l	2		12x6x4	1/4	2	2	2	35
12	H32T12-121204	ll	2	4	12x12x4	1/4	2	2	4	52
16	H32T16-121204	ll	2	4	12x12x4	1/4	2	2	4	52
24	H32T24-121204	ll	2	4	12x12x4	1/4	2	2	4	58
36	H32T36-181204	ll	2	4	18x 12x5	9/32	2	2	4	70
40	H32T40-181205	ll	2	4	18x12x5	9/32	2	2	4	74
56	H32T56-241204.5	ll	2	4	24x12x41/2	1/4	2	3	5	94
64	H32T64-281206	ll	2	4	28x12x6	5/16	4	3	5	150
96	H32T96-272104.5	lll	3.5	4	27x21x4 1/2	5/16	2 1/2	3	5	150
120	H32T144-343005.75	llll	5	4	34x30x5 3/4	5/16	3	4	8	330
144	H32T144-343005.75	llll	5	4	34x30x5 3/4	5/16	3	4	8	340
180	H32T180-343005.75	lllll	3	3.5	34x30x5 3/4	5/16	3	4	8	350